IntraAction PA Series High Power RF Power Amplifier
The Model PA-8 Series Amplifiers are linear class AB broadband RF power amplifiers capable of from 10 to 100 watts power output over the frequency range of 5 MHz to 120 MHz.
The Model PA-8 Series Amplifiers can be used to increase the RF power capability of laboratory signal generators, sweep generators, frequency synthesizers, and other signal sources. The Model PA-8 Series Amplifiers can also be used to drive acousto-optic modulators, frequency shifters, deflectors, and mode lockers. It can also be used for antenna and component testing, for line drivers in signal distribution networks, and for RFI/EMI testing. The fault/interlock circuit will latch the power supply off when an open circuit condition is present at the interlock input BNC, and can be connected to the thermal switch of a high power acousto-optic device or in a normally closed interlock circuit.
|
SPECIFICATIONS |
||||
|
Operation |
Class AB |
|||
|
Power Gain |
52 dB minimum |
|||
|
Harmonic Distortion |
-20 dBc at maximum output |
|||
|
Intermodulation Distortion |
IM products -25 dBc |
|||
|
Input Impedance |
50 ohms,VSWR 1.5:1 max. |
|||
|
Output Impedance |
50 ohms,VSWR 2.0:1 max. |
|||
|
Noise Figure |
8 dB typical |
|||
|
Mismatch Tolerance |
100% |
|||
|
RF Connectors |
BNC |
|||
|
Primary Power |
115/230 VAC, 50/60 Hz |
|||
|
Flatness |
1 dB at rated output |
|||
|
Size |
12.5 D x 5.0 W x 5.5 H inches 31.8 D x 5.1 W x 5.5 H cm |
|||
|
MODEL |
PA-20100-8 |
PA-4030-8 |
PA-4050-8 |
PA-10025-85 |
|
Frequency Range |
5 – 30 MHz |
20 – 60 MHz |
20 – 60 MHz |
80 – 120 MHz |
|
Output Power Capability |
100 Watts |
30 Watts |
50 Watts |
25 Watts |
OEM drivers available - please contact us with your requirements
MODEL PA-8 SERIES Datasheet 
