CI Systems Colorad - Multi Channel Radiometer
Product Code:
LP934
Manufacturer:
CI Systems
Colorad - Multi Channel Radiometer
- Up to 4 channels
- Configurable range of 0.2-14 µm
- Field of view (FOV) options for 40 or 80 mrad
- Ability to add telescopes for wide or narrow FOV
- Chopped mode for high sensitivity
- Direct mode for high speed (>100 kHz/channel
- Spectral & ND filters easily replaced during operation
The ColoRad is a multi-channel radiometer which is able to perform simultaneous radiometric measurements in up to 4 channels (two of which can be cryogenically cooled) with high sensitivity and speed.
The ColoRad is the perfect tool for performing field measurements in a number of defined spectral bands.
- Radiometric channels are customer configurable and cover the range 0.2-14 µm
- Field of view (FOV) options for 40 or 80 mrad are available with the ability to add telescopes for wide or narrow FOV. For example, a ColoRad may be ordered with 40 mrad FOV and an additional set of telescopes to increase the FOV to 80 mrad
- The Chopped operation mode gives high sensitivity, with a Direct mode available for fast measurements with sampling rates > 100kHz/channel
- User replaceable spectral filters and ND filters easily replaced during operation
- Comes complete with a small ruggedized PC and Power supply in separate carry case
Options
| Parameter | Value | Comments |
| Number of channels | 2-4 channels | Up to 2 cryogenic channels, configurable spectral engine combinations |
| Filters (per channel) | 1 spectral filter 1 ND filter |
2 filter slides in the optical path for each channel |
| Attenuators | ND1, ND2, ND3 | Included for each channel |
| Filter slides | Accommodate 1" diam. filter, 1.6 mm thick | User mountable |
| Field of view | 2.3° (40 mrad) or 4.6° (80 mrad) | Optional attachable telescopes |
| Field of view non-uniformity | <10% of maximum | |
| Field of view size accuracy | <±10% FWHM | |
| Channel bore sight accuracy | ±0.2° | (±3 mrad) |
| Modes of operation | Lock In (LIA) for high sensitivity Direct (DIR) for high speed |
AC Coupled DC Coupled |
| Chopping frequency | 100-1000Hz | SW controlled chopper |
| SW controlled chopper | 60kHz (-3db) | Chopper is in hold position |
| DIR mode rise time | < 10µsec | |
| DIR mode gain selection | 1, 10, 100 | SW selectable |
| NEI | 10-9-10-10 W/cm2 for DIR mode 10-10-10-12 W/cm2 for LIA mode |
Depending on the specific channel |
| Data acquisition | Up to 200 Ksample/sec/channel | |
| Control interface | RS232 (9600 Baud) | |
| Data interface | USB 2.0 | |
| Optical head to controller distance | 5 metre cable to the PC | |
| Bore sight viewer | CCD with FOV marker overlay and cross hair | Manual contrast control of FOV overlay pattern |
| Bore sight viewer FOV | > 5° or > 10° | |
| Weight of optical head | < 25 Kg | Depending on number of channels |
| Optical head dimentions | L 735 x W 294 x H 329 mm | With shade cover |
| Power supply | 100-240 VAC 50-60 Hz | External, power supply with 5m cable |
| Environmental conditions - work | 0°C - 40°C | |
| Environmental conditions - storage | -15°C - 70°C | Storage in case |
| Condensation prevention | Dry N2 purge valve available | |
| Carry case dimentions | L 857 x W 730 x H 429 mm | Rugged carry case with compartments for cables and accessories |
Applications
- Testing IR (DC/AC) flares and jammers
- Fast event measurement (muzzle flashes, detonations, final ballistics)
- Long range plume measurements
| Parameter | Value | Comments |
| Number of channels | 2-4 channels | Up to 2 cryogenic channels, configurable spectral engine combinations |
| Filters (per channel) | 1 spectral filter 1 ND filter |
2 filter slides in the optical path for each channel |
| Attenuators | ND1, ND2, ND3 | Included for each channel |
| Filter slides | Accommodate 1" diam. filter, 1.6 mm thick | User mountable |
| Field of view | 2.3° (40 mrad) or 4.6° (80 mrad) | Optional attachable telescopes |
| Field of view non-uniformity | <10% of maximum | |
| Field of view size accuracy | <±10% FWHM | |
| Channel bore sight accuracy | ±0.2° | (±3 mrad) |
| Modes of operation | Lock In (LIA) for high sensitivity Direct (DIR) for high speed |
AC Coupled DC Coupled |
| Chopping frequency | 100-1000Hz | SW controlled chopper |
| SW controlled chopper | 60kHz (-3db) | Chopper is in hold position |
| DIR mode rise time | < 10µsec | |
| DIR mode gain selection | 1, 10, 100 | SW selectable |
| NEI | 10-9-10-10 W/cm2 for DIR mode 10-10-10-12 W/cm2 for LIA mode |
Depending on the specific channel |
| Data acquisition | Up to 200 Ksample/sec/channel | |
| Control interface | RS232 (9600 Baud) | |
| Data interface | USB 2.0 | |
| Optical head to controller distance | 5 metre cable to the PC | |
| Bore sight viewer | CCD with FOV marker overlay and cross hair | Manual contrast control of FOV overlay pattern |
| Bore sight viewer FOV | > 5° or > 10° | |
| Weight of optical head | < 25 Kg | Depending on number of channels |
| Optical head dimentions | L 735 x W 294 x H 329 mm | With shade cover |
| Power supply | 100-240 VAC 50-60 Hz | External, power supply with 5m cable |
| Environmental conditions - work | 0°C - 40°C | |
| Environmental conditions - storage | -15°C - 70°C | Storage in case |
| Condensation prevention | Dry N2 purge valve available | |
| Carry case dimentions | L 857 x W 730 x H 429 mm | Rugged carry case with compartments for cables and accessories |
CI Systems Colorad Specifications Write Your Own Review
